4.9 (667) · € 25.99 · En Stock
Output Power: 12V/1A, 15.4W, DC Jack: 5.5*2.1mm. full IEEE 802.3af/at compliant. Widely use with most 12-volt devices. Input Power Voltage: DC 44-57V
Gigabit Active PoE Power Over ethernet Splitter Adapter 48V to 12V, DC Jack 5.5x2.1mm, IEEE 802.3af/at Compliant 10/100/1000Mbps PoE Splitter with 12V
Instantly add PoE to your network switch or router. This small, compact mountable PoE injector screws into the wall near an outlet or to the underside of desks, reducing clutter and offering versatility for your setup. Deliver power to 30w high-powered IP security cameras, VoIP phones, WAPs, and other devices that accept IEEE 802.3af and at PoE using a data network cable and this passive Power over Ethernet adapter / single port injector.
Single Port Gigabit Mode B PoE Injector with 48 Volt 30 Watt Output
The GAT-24v25w splitter provides 25 watts of continuous 24 volt power to any device. Use with your existing 802.3at PoE+ Switch or 48v PoE Injector to power devices like Legacy Ubiquiti 24-volt passive devices. p Simple application and installation will allow you to instantly convert 802.3at PoE+ to 24 volts with divided gigabit data.
PoE Texas 802.3at to 24-Volt Converter Easily Mix and Match 802.3at and 24-Volt Devices
Poe Texas PoE Injector - Single Port PoE+ Power Over Ethernet PoE Adapter for 802.3at - 10/100/1000 Gigabit Data with Integrated 52V 30W Power Supply - Plug & Play USB-C Tablet
WAVLINK USB3.0 WiFi Adapter, AC1300Mbps Wireless Network Adapter for Desktop PC, Dual Band 5GHz+2.4GHz WLAN with High Gain 2x 3dBi Antennas for
ANVISION 2-Pack Active 48V to 12V PoE Splitter Adapter, IEEE 802.3af Compliant 10/100Mbps, DC 12V Output, for IP Camera AP Voip Phone and More : Electronics
WAVLINK USB3.0 WiFi Adapter, AC1300Mbps Wireless Network Adapter for Desktop PC, Dual Band 5GHz+2.4GHz WLAN with High Gain 2x 3dBi Antennas for
REVODATA Gigabit PoE Splitter 12V/2A DC5.5 * 2.5mm Connector, 48V PoE to DC 12V/2A Output, Compatible DC 5.5 * 2.1 mm, IEEE802.3af/at 10/100/1000Mbps, Plug & Play PoE Adapter Active (PS5712TG-25)
The GAT-24v25w splitter provides 25 watts of continuous 24 volt power to any device. Use with your existing 802.3at PoE+ Switch or 48v PoE Injector to power devices like Legacy Ubiquiti 24-volt passive devices. p Simple application and installation will allow you to instantly convert 802.3at PoE+ to 24 volts with divided gigabit data.
PoE Texas 802.3at to 24-Volt Converter Easily Mix and Match 802.3at and 24-Volt Devices
PoE Texas Gigabit Data Splitter - Active UK
SECOMP CZ - Professional Computer Accessories by SECOMP - IT-Zubehör & Netzwerktechnik - Issuu
PoE Texas PoE Power for USB-C Devices, Including Google WiFi & Raspberry Pi – for POS Systems, Digital Signage & More, 802.3af POE to 5 Volt Splitter, Extend Power Delivery Up
【30W PoE Splitter】Real 12V 2.5A Output,complied with IEEE802.3 af (15W)/at(30W),IEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x standard.PD support 44V-57V
【Upgrade】 SODOLA 30W PoE Splittler, 12V 2.5A Output,IEEE 802.3af/at Standard, Power Over Ethernet Active Splitter Adapter for Security Camera CCTV
DPE-301GS PoE Splitter The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don't natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal.
D-Link DPE-301GS 1 Port Gigabit PoE Splitter